Contact Us
XGS UPPER CONTROL ARM FABRICATED STEEL (PAIR)
SKU
658CONTARM110R
$915
RRP, Excludes Fitment and Supplementary kits based on model
All your questions answered
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
| Material: | 250MPA Steel Material Electrocoated Zinc and powder coat finish |
| Castor Correction: | 3 degrees |
| Features: | Factory style rubber bushes designed to reduce NVH Factory style ball joints Stronger than Factory Allows for castor correction for vehicles lifted up to 65mm |
- NISSAN NAVARA NP300 08/15-11/20 DX-RX 2Dr C/C & P/Up
- NISSAN NAVARA NP300 08/15-11/20 RX King C/C & P/Up
- NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
- NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
- NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
- NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
- NISSAN NAVARA D23 S4 12/20-On STX King P/Up
- NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
- NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
- NISSAN NAVARA D23 S4 12/20-On PRO-4X
Write Your Own Review
Delivery costs and timeframes are subject to your location and the product(s) in your order. During the checkout, please enter your delivery address to get the latest costs and timeframes available for your order.
To view our returns policy, please click here.
| Weight | 6.840000 kg |
| Length | 410 mm |
| Width | 340 mm |
| Height | 140 mm |
- Approximate Fitting Time: 2hours
- Suggested Fitting Cost: $290 Fitting Instructions
Suggested time for fitment and fitment costs are an approximate figure only, actual labour costs may vary. See in-store for details.